tadano_logo
Tadano ATF 600G
Download
Tadano Fault Codes DTC
Tadano Fault Codes DTC
Tadano Fault Codes.pdf
Adobe Acrobat Document 42.4 KB

TADANO Fault Codes DTC

TADANO Cranes Fault Codes list DTC

 

01 Failure in the main speed sensor, 

  l. Gears in transmission are not shifted with the gearshift leaver in "D". 

  2. Speedometer does not work

02 Failure In the sub-speed sensor.

03 Failure in main speed sensor (when gearshift is in "N")

04 Failure In outrigger data (FL)

05 Failure in outrigger data (FR)

06 Failure in outrigger data (RL)

07 Failure in outrigger data (RR)

08 Abnormal torque converter pressure data

09 Abnormal air pressure data

10 Failure in accelerator sonsor 1 data

11 Failure in accelerator sensor 2 data

12 Failure in idle volume data

13 Failure in the upper A/D conversion

15 Upper unit RAM check error

16 Lower unit RAM check error

17 Failure in the lower A/D conversion

18 Upper unit ROM check error

19 Lower unt ROM check error

24 Failure in the transmission input signal combination (Actual transmission and gearshift lever position are not matched).

25 Failure in the transmission input signal.

27 Failure in steering more input signal combination

28 Interrupted communication from STME to lower unit

29 Faulty communication from STM-E to lower unit

30 Input value from main speed sensor is unusually high. 

  1. Speedometer indicates abnormally high speed. 

  2. Over speed warning buzzer sounds continuously.

31 Interrupted communication from lower to upper unit

32 Faulty communication from lower to upper unit

33 Interrupted communication from AML to upper unit

34 Failure in RAM for main speed data

35 Faulty communication from AML to upper unit

38 Interrupted communication from meter controller to upper unit

39 Faulty communication from meter controller to upper unit

48 ECU failure malfunction (it is not possible to run) DIAG 1 (red) in lower unit relay box lights

49 ECU warning malfunction (it is possible to run) DIAG 2 (amber) in lower unit relay box lights

93 Faulty RY4 output Monitored data ON while output data is OFF

94 Faulty RY5 output Monitored data ON while output data is OFF

95 Faulty RY6 output Monitored data ON while output data is OFF

96 Faulty RY7 output Monitored data ON while output data is OFF

97 Faulty RY8 output Monitored data ON while output data is OFF

98 Faulty RY1 output Monitored data OFF while output data is ON

99 Faulty RY2 output Monitored data OFF while output data is ON

9A Faulty RY3 output Monitored data OFF while output data is ON

9b Faulty RY4 output Monitored data OFF while output data is ON

9C Faulty RY5 output Monitored data OFF while output data is ON

9d Faulty RY6 output Monitored data OFF while output data is ON

9E Faulty RY7 output Monitored data OFF while output data is ON

9F Faulty RY8 output Monitored data OFF while output data is ON AO Faulty

RY9 output Monitored data ON while output data is OFF A1 Faulty

RY10 output Monitored data ON while output data is OFF A2 Faulty

RY11 output Monitored data ON while output data is OFF A3 Faulty

RY12 output Monitored data ON while output data is OFF A4 Faulty

RY13 output Monitored data ON while output data is OFF A5 Faulty

RY14 output Monitored data ON while output data is OFF A6 Faulty

RY15 output Monitored data ON while output data is OFF A7 Faulty

RY16 output Monitored data ON while output data is OFF A8 Faulty

RY9 output Monitored data OFF while output data is ON.

Comments: 0