Volvo Trucks logo

Truck's MID 141 Fault Codes DTC

Fault Codes Decryption (DTC). Volvo Renault, Mack Trucks MID 141

 

Truck Error code, Parameter, Description

 

Dynafleet System Control Unit

 

MID 141 SID 231 FMI 9

Data Channel SAE J1939.

The control unit does not receive messages on the SAE J1939 data channel from other control units. Damaged or oxidized contacts in the connectors, wire breakage of the data channel.

 

MID 141 SID 231 FMI 12

Data Channel SAE J1939.

There is no communication over the SAE J1939 data channel. Damaged or oxidized contacts in the connectors, wire breakage of the data channel.

 

MID 141 SID 240 FMI 12

Program memory.

Software malfunction or storage circuit malfunctioning.

 

MID 141 SID 250 FMI 9

Data Channel SAE J1708 / J1587.

The Dinafleet gateway does not receive messages over the SAE J1708 / J1587 data channel for a certain time. Damaged or oxidized contacts in the connectors, wire breakage of the data channel.

MID 141 SID 250 FMI 12

Data Channel SAE J1708 / J1587.

There is no communication over the SAE J1708 / J1587 data channel. Damaged or oxidized contacts in the connectors, wire breakage of the data channel.

 

MID 141 SID 253 FMI 2

EEPROM calibration memory.

The programming of the unit is incorrect or the memory chip in the control unit is faulty. Reprogram the Dinafleet control unit. In extreme cases, replace the control unit.

 

MID 141 SID 254 FMI 11

Controller.

The processor in the Dinafleet control unit is faulty. Replace Dinafleet Gateway Control Unit.

 

MID 141 PSID 1 FMI 12

Telephone

Fault in the integrated GSM module. The SIM card is defective or incorrectly installed. If the SIM card is installed correctly, replace the Dinafleet control unit.

 

MID 141 PSID 1 FMI 14

Telephone

GSM antenna not connected. Open or partial wiring between the antenna and the Dinafleet control unit. The antenna may be defective. If wiring and antenna are normal, replace Dinafleet control unit.

MID 141 PSID 2 FMI 2

Tachograph.

Incorrect information from the tachograph unit. Communication with the tachograph is broken. Check wiring to tachograph connection.

 

MID 141 PSID 3 FMI 12

GPS receiver

Internal fault in the integrated GPS receiver. Replace Dinafleet control unit.

 

MID 141 PSID 3 FMI 14

GPS receiver

GPS antenna not connected. Open or partial wiring between the antenna and the Dinafleet control unit. The antenna may be defective. If wiring and antenna are normal, replace Dinafleet control unit.

 

MID 141 PSID 4 FMI 12

Datamax.

Datamax module is defective or missing. Check fault codes in the MID144 vehicle control unit.

 

MID 141 PSID 7 FMI 12

TTU

There is no communication between the Dinafleet gateway and the Dinafleet Driver Tool. The Dinafleet Driver Tool block is defective or missing. Faulty wiring between the Dinafleet gateway and the Dinafleet Driver Tool.

Comments: 0